I recently purchased a 2000 Honda rancher 350 TE and I am having trouble with the shifting of the fourwheeler. When I turn the key on, no codes flash or anything, and you can shift through all gears with fourwheeler off, both up and down. Now when I start the thing and start running through the gears, if I don’t give it full throttle and just "putt" through the gears everything is fine, it will shift both up and down. but if I get into fourth gear and throttle wide open, it won’t allow me to shift into fifth, or back down into third, I have to turn the fourwheeler off and turn it back on and everything goes back to normal, it is not an intermittent problem, it does this every time. I read on one forum where someone said the angle sensor being bad would cause this, mine wasn’t coding bad, but I went ahead and changed it.
The speedometer does not work, and when the wire connectors are plugged together for the speedometer, my gear position doesn’t read, but if I unplug the speedometer, the gear position will read correctly.
I know this is a long shot but I am very frustrated and figure it cant hurt but to try and ask others with loads more knowledge then I have on these things..
Thank you all for taking the time to read my thread and any help would be greatly appreciated.
Bryce
