Well here is my issue hope somewone can shed some light.
I took my bike out for a drive last night and got up to 4th gear and that was it it Quit shifting
I have a 2000 350FE 4×4 and will not shift with buttons up or down but can shift with tool no problem.
My Display works fine no flashing or anything when i shift with tool
I had angle sensor out and replaced with new one still nothing.
Took shift motor out and checked connections all good reinstalled and disconnected the wiring harness up under handle bars Orange and Green wires Took +and- from battery and jumped them to test and could get to shift fine 1-2-3-4-5 reversed polarity 5-4-3-2-1 and even reverse worked.
Checked the 2 switches on handle at ECU (22P) and have contenuity from both to ECU.
Hard to follow wiring schematic from smartphone
i will check wiring to connector from ECU tomorrow
Anyone have any more ideas
TIA