My CDI went bad, found the side was blown out. Put new one on, and all the voltages read good. 3 weeks later, it blows again. Found the in line fuse off the positive battery, was melted. Replaced the fuse holder and the fuse blew as soon as I hit the starter. smoke from the area of the CDI, Put a new fuse and tried it, and everything works good, except there is no spark. I am thinking either I have a direct ground on the wiring harness, but more likely a stator that intermittently goes to ground. What is your experience on this issue?
My CDI went bad, found the side was blown out. Put new one on, and all the voltages read good. 3 weeks later, it blows again. Found the in line fuse off the positive battery, was melted. Replaced the fuse holder and the fuse blew as soon as I hit the starter. smoke from the area of the CDI, Put a new fuse and tried it, and everything works good, except there is no spark. I am thinking either I have a direct ground on the wiring harness, but more likely a stator that intermittently goes to ground. What is your experience on this issue?
