This is my first personal atv, I’ve worked on a couple friends but none were a Polaris. I picked this up for dirt cheap and have some time to fix her up.
What I’m working on right now is the clink and clank coming from the clutch. The outer and inner clutch housing I believe needs replacing as it is cracked in places, rubbing clutch, and missing bolt holes. Currently I just have the outer one off. Now to the sound – as the idle slows down to a stop I hear the weights clinking. 2 out of 3 of the weights move freely side to side. I was doing some research and see there are various boots, washers, etc that can be replaced. My question is where should I begin? Do the weights have side rubber washers, do the allen key pins that go through them wear out and create slack? And anything else I should know in fixing the sound.
Thank you
What I’m working on right now is the clink and clank coming from the clutch. The outer and inner clutch housing I believe needs replacing as it is cracked in places, rubbing clutch, and missing bolt holes. Currently I just have the outer one off. Now to the sound – as the idle slows down to a stop I hear the weights clinking. 2 out of 3 of the weights move freely side to side. I was doing some research and see there are various boots, washers, etc that can be replaced. My question is where should I begin? Do the weights have side rubber washers, do the allen key pins that go through them wear out and create slack? And anything else I should know in fixing the sound.
Thank you