1990 big bear 350 4×4 .there are 2 plugs going into the stator 1 has 3 white wires the other has 4 wires 1 blue 1 red 1 yellow and 2 white with green stripe.what should I test and what ohms should they read.and can I also test the cdi the manual says test the red and brown and green and white but my plug don’t have those colors please help.tested coil at spark plug tests good and plug is new ignition switch and kill switch test Good as well.so it’s cdi or stator.I just want to be sure before I wast money on parts I don’t need.thx guys for any help.