My 1987 Honda TRX350 4wd ATV front loader build took about a year to complete. As this ATV has no powertake off, a Honda GX200 6 1/2 motor was
used to power a 4 GPH hydraulic pump. A 3 gallon hydraulic tank supplies the oil. The loader has four hydraulic rams- two for lifting and two to tilt the bucket. The two level controls are the left side of driver. The loader section was scratch build and made to be bolted on to existing tubular frame. It can removed from the ATV in about 45 minutes. The pump motor and tank is bolted to the rear rack and is connected with quick release couplings.
used to power a 4 GPH hydraulic pump. A 3 gallon hydraulic tank supplies the oil. The loader has four hydraulic rams- two for lifting and two to tilt the bucket. The two level controls are the left side of driver. The loader section was scratch build and made to be bolted on to existing tubular frame. It can removed from the ATV in about 45 minutes. The pump motor and tank is bolted to the rear rack and is connected with quick release couplings.