I have a 4×4 i bought a few months back the previous owner wired the fuel pump into the fuse box piggy backing off another wire… when you ride it for more than 45 mins the fuse and fuse box gets so hot it melts… ive unhooked the pump from tht wire and ran it striaght to the battery and put a fuse block in the line from battery to pump . Only issue is i have to unplug the ground each time i cut off the atv or the pump will continue to run … any idea of a wire i could piggy back off of tht will cut power with the switch and not over load the fuse . Or should i just go with a toggle switch …