Working on a 85′ ATC70 rebuilding the ignition system: Stator, points and condenser. Owner claims the ign.coil is new. The question I have, is anything supposed to connect to the terminal connector that comes from the stator? There are 2 wires that come out from the stator assembly: blk and drk grn. I know the black goes to the coil and kill switch, and the dark green goes to the connector then there is a lg/r wire that comes from the neutral safety switch, and goes to the same connector as the drk grn. But it is just a open connector with a rubber cap over the end. Is there supposed to be a jumper block plugged into that connector??? I’m thinking the drk grn wire is a charge wire if there were a headlight and battery. but that still leaves the lg/r wire a mystery to the saftey switch. I’m thinking Jake from down under may be the one to chime in on this. any help with my rusty memory would be appreciated.