So I put a new oem belt on my 500 a few weeks after I bought it this summer cause I needed a spare and it had a g force belt on it. I’ve read the g force belts are good but the oem are still the best. Well after about 4 rides or so I noticed a popping noise coming from the housing around the belt. I’ve read where it can get slack in it and this happen, and once it warms up good it doesn’t do it. What could cause the belt to stretch out so quick? I only ran it on dirt/mud trails and it was always in low gear. I cleaned the clutches real well too when I replaced the springs the same time I put the new belt on. Just want to see if I did something common without realizing it to make this happen. Belt can’t have more than 150 miles on it.