Hello everyone, I am a newbie to the forum. Been working on ATV’s for around 20 years, and this is my first CANAM. It is an 06 Outlander 800. Everything works as it should except the digital functions on the speedometer just quit working. It was fine one day, didn’t work the next. Speedo still lights up any time the key is on, and it starts and runs great. Don’t have any indicator lights or Digital readouts. I have checked the power on pins 8 and the ground on pin 11, both are fine. (Don’t think it would light up if they weren’t). Checked for continuity between the ECM and the speedo (both wires) and all is fine there. Didn’t know if anyone else has had the same problem, or if I could find a pin out for the speedo to verify if it is indeed bad. I have the factory manual, but it doesn’t have any kind of pin out for the speedo. Hope I have explained my problem well enough, thanks in advance for any suggestions!