Hi everybody. I’m new here, and having some issues. I have a 05 TRX500 rubicon with the hondamatic trans. I changed the oil the other day, made sure it was full, then started it up to run for a bit. I shut it off after about a minute, rechecked the oil to make sure it was full, and it was good to go. So I got on, started it up, went in to reverse no problem, backed it out of the shop, and then put it in drive. I noticed when it went to drive, the gear position indicator went to just 2 bars on the screen. It would not show that I was in drive. So I gave it a little gas and felt it click into gear, but the gear position didn’t change. I started out the driveway and it wouldn’t shift out of first. I tried d1, d2, and esp, and none of them will shift or change the gear position indicator. So I got to reading around on the net and learned how to do the code retrieval. It flashed 10 times. I can’t find anything that tells me what a code 10 is, or what could possibly be the problem. If anyone has any idea what could be wrong the help would be appreciated.