Hey folks, I recently replaced the starter solenoid and starter on my sportsman 500 because the solenoid was clicking. I got the new solenoid hooked up with the fusible link wire going to the post with the 12v battery cable and both ground wires/switches on the lower posts. Solenoid is grounded to the frame and 12v is getting from the solenoid ground and the battery so the solenoid is receiving 12v. When I turn on the key I get a display but when turning to start I get nothing. Does anyone have any ideas. I am at a loss. I have a FSM and a meter but I don’t even know where to go from here. Thanks in advance.

Hey folks, I recently replaced the starter solenoid and starter on my sportsman 500 because the solenoid was clicking. I got the new solenoid hooked up with the fusible link wire going to the post with the 12v battery cable and both ground wires/switches on the lower posts. Solenoid is grounded to the frame and 12v is getting from the solenoid ground and the battery so the solenoid is receiving 12v. When I turn on the key I get a display but when turning to start I get nothing. Does anyone have any ideas. I am at a loss. I have a FSM and a meter but I don’t even know where to go from here. Thanks in advance.