I have been reading through different posts and I believe I am on the right track, but would appreciate confirmation. I have an 2007 Rancer trx420FM which has the 24 8-12’s on the front and 24 10-11’s on the rear. The rims are all bent up and the tires are worn. I have a chance to replace them with a set from a Suzuki King Quad with new rims and new tires (take offs). The bolt circle is correct at 4 on 110. The rims are 25 11-12’s and 25 8-12’s, so the rear rim is a larger diameter – but they will both be a 25 height, correct (just like the originals are both a 24" height)? And the offset is supposed to be a5x2m and an 2×5 if I understand correctly. Which translates to if I take a straight edge and lay it across the rim, the bolt face will be 2" recessed on the fronts, and 5" on the rears? Are there any problems in going from the 11" to the 12" rear wheel diameter if the bolt circle and offset are the same?