So I took my clutch cover off today after cleaning my rzr to check on the belt and blow out whatever dust was in there only to find the bolt holding the primary clutch on was loose. I pulled the bolt out and found that half the threads on the bolt has sheared off. This happened after 5 hours of ridding at the dunes as i pull the cover off after every ride to inspect the belt and make sure everything looks fine. So i took it to the dealership today and they looked at it. They said they couldn’t get the clutch off because the tools that they use to pull the clutch wouldn’t go in there from the other half of the bolt still stuck in there. They were going to contact polaris tomorrow and see what they want to do. The two options that they said was to find some way to pull the clutch off and hope that they can still pull the other half of the bolt out or they will be pulling the motor apart and replacing the crank and clutch.