Relocation Kit for RZR Voltage Regulator
The stock placement of the voltage regulator on the RZR is directly behind the plastic near the trailing arm connection. This puts the Voltage Regulator in direct line of mud, water, and debris, with minimal airflow. The lack of airflow has led to failures of the Voltage Regulator due to shorting out and overheating issues. The regulator has a thermal shutoff, but we feel that a fused connection would be a much better safety measure against failure, protecting the machine and its electronics particularly in the case of a short circuit, thus we have included an in-line 40 AMP fuse to the power connection.
Allegheny Off Road has developed a Voltage Regulator Relocation Kit which is completely plug and play. Simply remove it from its stock location, run the harness down the driveline channel, and mount it on our bracket which will be installed on the front end on the frame located behind the headlight. This gives the Voltage Regulator instant airflow, yet keeps it far from the radiator to not absorb heat. (heat soak is a big concern for the rock crawling guys and people who idle their machines for long periods).
The kit includes a plastic mounting bracket, plug and play wrapped wiring harness, and all the associated hardware needed for mounting and running to the new location.
We are taking pre orders for the Voltage Regulator Relocation Kit, with delivery to be within 3-4 weeks of purchase. Pictures will follow as this is our first production run.
Priced at $95 plus get 10% off using the coupon code Holiday.
Go to our website to purchase:
https://www.alleghenyoffroad.com/pro…elocation-kit-
