I am getting frustrated with my brakes. I had a miss hap when the caliper bolts broke off or shook of the rear. I had put new pads in I think they got cock eyed against the caliper plate. I think the pads had some burs on them causing the issue. I filed the pad plate to fit better and reassembled. I noticed the caliper was moving side to side when I rand it with out a tire. Well I replaced the bearing still had caliper wobble. Replaced the disc or rotor still had wobble. When I mic the hub I get 10 thou run out from the hub to the wise bone on two of the bolt spots were the rotor hooks up. Would 10 thou on the hub cause the rotor to wobble the caliper to the point you can see it with the naked eye. The other side does not move. all I have left is to replace the hub or the wise bone or the axle. what do you fellows think?:icon_ cry: