Factor 55 ProLink, Shackle Mount for Winch Lines


Factor 55 introduces the new ProLink shackle mount for winch cables and synthetic ropes. Engineered and machined in the USA from lightweight billet 6061 aluminum, the ProLink provides a safe means to easily attach a standard 3/4″ screw pin shackle to existing winch cable and rope eyes The cable or rope eye is captured into the body of the ProLink by a removable oversized 5/8″ double shear pin. The front of the ProLink provides the precision shackle mounting hole and massive 1.2″ thick mounting tab. The ProLink is compatible with both Hawse and Roller fairleads and snugs neatly against both versions.

SAFER – STRONGER – SMARTER

Replace conventional winch hooks with the new safer, stronger, and smarter Factor 55 ProLink shackle mount.

The advantages of winching with a screw pin shackle over a conventional winch hook are many:

Screw pin shackles are up to 5X stronger than conventional winch hooks

Conventional hooks are too small to safely fit both ends of a recovery strap

Recover straps cannot slip out of a shackle like they can with hooks

Hook safety latches are not rated for loads and can tear recovery straps

Conventional hook add higher stresses to recovery strap fibers, resulting in decreased strap ratings

Shackles can be quickly removed and stowed away until needed for winching

Hooks do not cinch neatly against fairleads and are prone to rattling and loosening

Conventional winch hooks are designed for chains – not commonly used recovery straps

Engineered, Tested, and Made in USA — Patent Pending

Stress analyzed using COSMOS FEA and destructively tested for confirmation

Billet construction — precision machined from 6061-T6 Kaiser Aluminum round bar

16,000 pound max load rating

Fits all steel cables and synthetic ropes up to 3/8″ in diameter

Fits eyes equipped with standard or tube thimbles to 3/8 inch diameters

1.2 inch shackle tab thickness virtually eliminates “shackle rattle”

Massive 5/8 inch diameter carbon steel double shear pin – 6Al-4V Titanium upgradeable

Optional EPDM “Rubber Guard” protects alloy Hawse fairleads — rubber barb attachment

Can be installed and removed in minutes — simple snap ring removal

Cinches neatly against all types of fairleads — Hawse or Roller

Beautifully anodized and zinc plated in the USA

Factor 55 at Sxsperformance.com

Pm for pricing..

SL

Factor 55 ProLink, Shackle Mount for Winch Lines


Factor 55 introduces the new ProLink shackle mount for winch cables and synthetic ropes. Engineered and machined in the USA from lightweight billet 6061 aluminum, the ProLink provides a safe means to easily attach a standard 3/4″ screw pin shackle to existing winch cable and rope eyes The cable or rope eye is captured into the body of the ProLink by a removable oversized 5/8″ double shear pin. The front of the ProLink provides the precision shackle mounting hole and massive 1.2″ thick mounting tab. The ProLink is compatible with both Hawse and Roller fairleads and snugs neatly against both versions.

SAFER – STRONGER – SMARTER

Replace conventional winch hooks with the new safer, stronger, and smarter Factor 55 ProLink shackle mount.

The advantages of winching with a screw pin shackle over a conventional winch hook are many:

Screw pin shackles are up to 5X stronger than conventional winch hooks

Conventional hooks are too small to safely fit both ends of a recovery strap

Recover straps cannot slip out of a shackle like they can with hooks

Hook safety latches are not rated for loads and can tear recovery straps

Conventional hook add higher stresses to recovery strap fibers, resulting in decreased strap ratings

Shackles can be quickly removed and stowed away until needed for winching

Hooks do not cinch neatly against fairleads and are prone to rattling and loosening

Conventional winch hooks are designed for chains – not commonly used recovery straps

Engineered, Tested, and Made in USA — Patent Pending

Stress analyzed using COSMOS FEA and destructively tested for confirmation

Billet construction — precision machined from 6061-T6 Kaiser Aluminum round bar

16,000 pound max load rating

Fits all steel cables and synthetic ropes up to 3/8″ in diameter

Fits eyes equipped with standard or tube thimbles to 3/8 inch diameters

1.2 inch shackle tab thickness virtually eliminates “shackle rattle”

Massive 5/8 inch diameter carbon steel double shear pin – 6Al-4V Titanium upgradeable

Optional EPDM “Rubber Guard” protects alloy Hawse fairleads — rubber barb attachment

Can be installed and removed in minutes — simple snap ring removal

Cinches neatly against all types of fairleads — Hawse or Roller

Beautifully anodized and zinc plated in the USA

Factor 55 at Sxsperformance.com

Pm for pricing..

SL