to start off it is a 2015 efi rzr170. the reason for getting the efi was so I didn’t have to mess around with jetting when we go riding. any kid will tell you how boring it is just waiting to ride when you are looking at the trails and everyone else is on them. started with lights, swapped out the normal bulbs for LED’s for the power consumption drop and was able to put on the top lights. installed a toggle switch next to the steering wheel for those. next thing was tires. didn’t care about what looks good as much as caring about functioning on the multiple trail types, so I got a set of spacers and borrowed my buddies rancher wheels and tires. the only down side is rubbing because the fronts are 8" wide. the next was the intake for the engine fan. what a terrible design from the start, but where one leaves off another picks up the pieces. just simply cut a piece of plexiglass into a rough shape did some test fitting, drilled and counter sunk the holes, then bought a maf sensor adaptor off amazon along with filter. it looks horrible with the parts in prep stage but looks a lot better now its some what finished.:turtle::censored: