Wild Boar has added another product to its line-up this year, A Rear Rack for the Polaris Scrambler850/1000, it is Powder coated and made of steel. We set out to make a rear rack that not only looked good but had Strength and durability. There is no drilling or cutting to mount this rack it attaches to the factory mount on the rear of the bike
Polaris Ranger 500/800 Xtreme Front Bumper L.E.D Lights Free Shipping
The Wild Boar Front Bumper replaces your stock front bumper allowing you to mount up to a 4500 lb winch on top. Our Bumper can hold the bigger winches because we put supports inside the bumper. See Features Below:
Replaces your Stock Front Bumper.
Allows you to mount up to a 4500 lb winch on top.
All welds ground smooth.
Three Winch Mount Bolt Patterns
Texture Powder Coated for Superior Protection
Fits the following Vehicles:
2009-2010 Polaris Ranger 500 4×4.
2010-2014 Polaris Ranger Crew 800 (four seater) – does not fit the mid-size 500 Crew.
2009-2014 Polaris Ranger XP800 full-size.
Polaris Ranger 500/800 Xtreme Front Bumper L.E.D Lights Free Shipping
The Wild Boar Front Bumper replaces your stock front bumper allowing you to mount up to a 4500 lb winch on top. Our Bumper can hold the bigger winches because we put supports inside the bumper. See Features Below:
Replaces your Stock Front Bumper.
Allows you to mount up to a 4500 lb winch on top.
All welds ground smooth.
Three Winch Mount Bolt Patterns
Texture Powder Coated for Superior Protection
Fits the following Vehicles:
2009-2010 Polaris Ranger 500 4×4.
2010-2014 Polaris Ranger Crew 800 (four seater) – does not fit the mid-size 500 Crew.
2009-2014 Polaris Ranger XP800 full-size.
Wild Boar has added another product to its line-up this year, A Rear Rack for the Polaris Scrambler850/1000, it is Powder coated and made of steel. We set out to make a rear rack that not only looked good but had Strength and durability. There is no drilling or cutting to mount this rack it attaches to the factory mount on the rear of the bike
Wild Boar has added another product to its line-up this year, A Rear Rack for the Polaris Scrambler850/1000, it is Powder coated and made of steel. We set out to make a rear rack that not only looked good but had Strength and durability. There is no drilling or cutting to mount this rack it attaches to the factory mount on the rear of the bike
Wild Boar Heavy Duty Axles are built out of the highest quality material and heat treated so you know you’re getting the strongest possible axle for your money.
20% larger axle bar and 15% larger CVs than most OEM axles, you can rely on your Wild Boar Heavy Duty Axles to offer a significant strength advantage over the competition. The CNC machined internals and heat treated components offer reduced operating temperatures and wear while the axles are running at higher angles. Wild Boar believes in our products and we offer a 1 year warranty with our AXLES.
Wild Boar Heavy Duty Axles are built out of the highest quality material and heat treated so you know you’re getting the strongest possible axle for your money.
20% larger axle bar and 15% larger CVs than most OEM axles, you can rely on your Wild Boar Heavy Duty Axles to offer a significant strength advantage over the competition. The CNC machined internals and heat treated components offer reduced operating temperatures and wear while the axles are running at higher angles. Wild Boar believes in our products and we offer a 1 year warranty with our AXLES.
The Stealth winch by KFI is water resistant, comes with all wiring and switches to install (you will need a winch mount in most cases) and has a fiber rope.
KFI Stealth Winch with 4500 lb pulling power can easily pull its weight in tough situations. For work or play you and your UTV can feel confident you can get the job done with this water resistant piece of hardware. Constructed of cast aluminum and durable steel components, the Stealth winch also includes all wiring and switches needed for installation. You will need to add a winch mount with this heavy duty Stealth.
We’ve been using KFI for years on all our stuff and can attest to their quality and functionality.
They are also backed by a KFI 1 year limited warranty.
The Stealth winch by KFI is water resistant, comes with all wiring and switches to install (you will need a winch mount in most cases) and has a fiber rope.
KFI Stealth Winch with 4500 lb pulling power can easily pull its weight in tough situations. For work or play you and your UTV can feel confident you can get the job done with this water resistant piece of hardware. Constructed of cast aluminum and durable steel components, the Stealth winch also includes all wiring and switches needed for installation. You will need to add a winch mount with this heavy duty Stealth.
We’ve been using KFI for years on all our stuff and can attest to their quality and functionality.
They are also backed by a KFI 1 year limited warranty.
The Wild Boar radiator relocation kit is the best in the market, they are powder coated and made of Steel to last in the harshest conditions. The Kits will come with everything you need to mount the radiator on the front rack of your ATV.
Nothing will kill a ride faster than your ATV overheating.
Nothing causes your ATV to overheat faster than mud in the radiator.
The solution to this problem is moving your radiator up onto the front rack to get it out of the mud that you’re playing in. Everyone has seen this done. Your buddy shows up with his radiator high and dry and free of mud and never has any trouble with his bike overheating, but it looks like a job done by ‘Shade Tree Customs’ of Poorville, USA. Not these ATV radiator relocation kits… Just take a look at them! They are all Steel construction complete with all the necessary mounting hardware. Laser cut and powder coated, this will not only be the most solid, complete kit you’ve ever seen, but it will also be the best looking. So keep the bike running cool all weekend long and purchase a Wild Boar radiator relocation kit.
This kit provides easy access to the radiator cap so you can maintain fluid levels with minimum hassle.
Features:
· 12-gauge steel.
· Wrinkle black powder coat finish or Red.
· Kit comes with additional hose, mounting brackets, and all hardware.
· This kit helps keep the mud off of the radiator
· Helps the motor to run at a cooler tempature.
· Makes cleaning and maintenance easier.
· User-friendly installation instructions.
· Complete kit with no additional hardware required