This is a new oversize recovery rope made with 100% nylon for snatch or stretch properties. This is a great rope for vehicle to vehicle recovery. It features loop ends with woven protection sleeves.
This rope includes a free camo mesh duffle style storage bag (20232).
It is meant to compete against Bubba Rope with similar size/capacity but offered at a significant savings.

Bulldog Winch products at SXSPerformance.com

Pm for pricing..

SL

Sizes : 2in x 10ft – 2in x 20ft – 3in x 10ft

Recovery straps at SXSPerformance.com

PM for pricing…

SL

Sizes : 2in x 10ft – 2in x 20ft – 3in x 10ft

Recovery straps at SXSPerformance.com

PM for pricing…

SL

SLP clutch kits have been designed and tested to get the most consistent performance out of your Polaris UTV. We have been working with centrifugal clutches for over 40 years, and know how to tune them to transfer your horsepower to the ground. In most cases, optimizing the clutch setup is the best performance gain for the dollar spent. Through our testing we have found two distinctly different clutch setups depending on what type of terrain that you drive on.

SLP Trail Clutch kit:
These kits are designed for semi hard surface trails with the occasional run in muddy or sandy conditions. They provide improved engagement mannerism, throttle response with better top end power and consistency over a broad range of elevations and conditions.

SLP Sand, Mud or Large Tire Clutch Kit (High Load):
These clutch kits are for high load environments such as sand, mud or when 1" to 2" larger tires have been added. When exposed to these high load conditions, the stock clutching performs poorly, leaving the vehicle with poor throttle response and loss of RPM. These clutch kits provide improved engagement mannerism, throttle response with better top end power and consistency over a broad range of elevations and conditions.
Note: If performance modifications, larger tires (+3" or larger), paddle tires, or weight has been added or removed from you UTV, please let us know so we can tailor your clutch kit accordingly.

Starting Line Product clutch kits at SXSPerformance.com

Pm for pricing..

SL

Vendetta Motorsports’ RZR XP 1000 front CV guards are made of aluminum and bolt up to the stock location and provide more protection than the stock CV guards.

*Note: Front CV guards are sold as a set

Vendetta Motorsports at SXSPerformance.com

Pm for pricing and additional options by vendetta Motorsports..

SL

Driven offers every thing from engine oil to race wax..

Driven racing oil and cleaning products at SXSPerformance.com

Pm for options and pricing..

SL

The Mob Mount Switch is the ultimate solution in smartphone holders. The Switch combines the two mounting options from the original Mob Mount (magnet & bar) into one extreme mount with the ability to hold up in the toughest conditions. The Switch comes with a powder coat finish for durability and is available in multiple colors to suit your style. There are currently two mounting options with more to come for this versatile product due to it’s unique design with a universal bracket.

Mob Armor Mounts at SXSPerformance.com

PM for pricing..

SL

http://www.sxsperformance.com/polaris-rzr-xp-1000-doors-set.html
PRP Seats has developed the easiest to install RZR XP 1000 doors on the market. And, they look pretty good too! Even if you’re not handy with your tools, these should take you less than half an hour. Just unbolt the stock doors, bolt on, add the skins, and transfer the latch. A little fine tuning and you’re done. The aluminum panels are secured quickly onto the sturdy, all steel frames with Dzus tabs and weather stripping along the frame to keep the rattle to a minimum.

*Note: Doors fit the 2 seater RZR XP 1000 ONLY

*Also available for the XP41k

Polaris RZR XP 1000 Doors (Set)

Pm for pricing..

SL

http://www.sxsperformance.com/polaris-rzr-xp-1000-doors-set.html
PRP Seats has developed the easiest to install RZR XP 1000 doors on the market. And, they look pretty good too! Even if you’re not handy with your tools, these should take you less than half an hour. Just unbolt the stock doors, bolt on, add the skins, and transfer the latch. A little fine tuning and you’re done. The aluminum panels are secured quickly onto the sturdy, all steel frames with Dzus tabs and weather stripping along the frame to keep the rattle to a minimum.

*Note: Doors fit the 2 seater RZR XP 1000 ONLY

*Also available for the XP41k

Polaris RZR XP 1000 Doors (Set)

Pm for pricing..

SL

Pro Armor’s brand new aluminum roof is sure to get everyone on the trails looking your way. Lightweight and durable the pro armor’s aluminum roof not only adds style but also adds protection. No drilling required. Pro Armor’s unique cage attachment system is sure to keep your roof clamped to the cage. Never sacrifice style for comfort, get both with Pro Armor.

Comes in a powder coated black finish.

Stock Aluminum Roof for the XP4 1000 – BLACK

Pm for pricing..

SL