Ok I searched everywhere when making my own kit and could have done a few things different but this is how I did it and you can adapt it to your ride.
I used spa hose from Home Depot and plenty of regular PVC with rubber fittings for some of the elbows and 90’s. The rest I used typical PVC couplings. As I post pics I will give and explanation and try to list materials.
Also I have used the snorkel easily and it worked flawless. The only thing I need to do is re- jet/ rebuild my carb. It’s old and dirty I’m sure. And re-seal the cvt housing that mates to the motor/gear box.
I have a 2000 MAGNUM 325 2×4 that I have owned since new. I really want to keep it and have already tried cleaning her up and doing some minor additions.
Homemade snorkel kit and added some black mamba lites. It does some pretty good water wheelie action but I really want 4×4. I found a newer model magnum 330 4×4 today at a lawn mower repair and he is working on getting me a price. The plastic and seat are trash and the tires of course. Its been sitting for awhile but I want to use it as a parts bike. I could use the frame and running gear. I guessing the motor is not running but not sure. I know my 325 is strong and would most likely fit in the 330 frame and hopefully attach to the trans/ gear box. If I am right let me know or please tell me what years are similar or not. I would like to do this swap and have myself a nice blue 4×4 magnum I can play around with before I drop the cash for a Ranger one day.
I have a 2000 MAGNUM 325 2×4 that I have owned since new. I really want to keep it and have already tried cleaning her up and doing some minor additions.
Homemade snorkel kit and added some black mamba lites. It does some pretty good water wheelie action but I really want 4×4. I found a newer model magnum 330 4×4 today at a lawn mower repair and he is working on getting me a price. The plastic and seat are trash and the tires of course. Its been sitting for awhile but I want to use it as a parts bike. I could use the frame and running gear. I guessing the motor is not running but not sure. I know my 325 is strong and would most likely fit in the 330 frame and hopefully attach to the trans/ gear box. If I am right let me know or please tell me what years are similar or not. I would like to do this swap and have myself a nice blue 4×4 magnum I can play around with before I drop the cash for a Ranger one day.
Replaced the drive belt today on my 2000 Magnum 325, I was going to replace anyway as part of my overall maintenance since it’s new to me. The belt did measure under the width spec per the service manual. However the belt looked fine overall except it is missing a chunk, the picture may not show it very well, just curious what might have cause it.
Can anybody tell me what size the oil cooler hoses are on my 2000 Magnum 325? I have a parts manual that gives part numbers for the replacement hoses but does not tell me what the sizes are. I’m thinking 5/8" and 1/2" but no markings on the hoses and I’d like to get the hose before removing them.
On the left hand side of my rear axle the rubber o-ring is starting to come apart and some grease is leaking out of the housing. I had just put fresh grease in there for the first time this year about a month ago. Man…I really don’t feel like another "project" right now. I’ve been through it with this thing lately.
How serious an issue is this?
& Should I stay off it until it’s fixed?
On the left hand side of my rear axle the rubber o-ring is starting to come apart and some grease is leaking out of the housing. I had just put fresh grease in there for the first time this year about a month ago. Man…I really don’t feel like another "project" right now. I’ve been through it with this thing lately.
How serious an issue is this?
& Should I stay off it until it’s fixed?
My 4wd doesn’t work when I bought it from the previous owner they gave me parts to supposedly fix it but its for the front differential and I don’t hear a grinding sound so I don’t think that’s the problem what do u guys think it is
I have a 1995 polaris magnum and I’m wanting to lift it. I’m aware there isn’t any lift kits anywhere was wondering if there was one that would interchange with the magnum?
Hey guys I have finally got my 325 running and aside from the 4wd I have found another problem when I turn the key off it doesn’t turn off all the time and I Dont know what the problem is?