Can any one tell me if they have a interchange number for the relay so I can go to the parts store to buy a relay it’s a. 2015 rzr 900

hey guys so i was bombing around today and hit a very unexpected deep mudhole. did not get stuck, powered through but when driving back home home the turn signal lights on the instrument panel light up and havent turned off even after washing the machine. any ideas?

Attachment 142446

Attached Thumbnails

 

hey guys so i was bombing around today and hit a very unexpected deep mudhole. did not get stuck, powered through but when driving back home home the turn signal lights on the instrument panel light up and havent turned off even after washing the machine. any ideas?

Attachment 142446

Attached Thumbnails

 

Besides a 6 gauge primary, what size wire would you recommend from fuse block to relay, relay to switch, and relay to accessory.

I’m running 100 amp circuit breaker to 100 amp blue sea block. Running 30" light bar, 2 4" back up lights, cheap ass rock lights, and 200 w 4 speaker stereo.

Should I just run 12 gauge all around or is that too much going to switches? The rock lights have a cheap 18-22 gauge coming off of them. Are the wiring harness tat came with relays seem to be 18-22 as well, maybe 16.

What do ya’ll recommend?

Thanks

I am currently running two 6.5 tower speakers, with a cheap marine amp. As of the last ride, my dry box is no longer dry and my amp is no longer working. That being said, I have been planning on going with wet sounds stealth 10 for some time now. However, I would still like to keep my tower speakers to cover the lower range since I hear the bars have little bass. My question is, if I run a line out of the stealth bar to an amp in order to sync them with sound bar, what amp would you recommend? I know very little about amps, so I am unsure as far as how many channels I would need, how many watts, and if I should look for a particular one in order to tune the setup? Thanks for any advice!

Finally figured out how to get a serious xm installed ,couldent figure out how or where to put it
Sitting in my car looking around. And saw that the second set of speakers has the same case. As the stereo , took the speakers out and took apart installed a 12v plug in the little cubby hole tied it into the o/h lights made a plate to fit the case -mounted unit to the plate and mounted it using the bolts and cubby hole mounts. Transmits over fm.
so pretty simple install once mounted so now I have reception where ever, don’t need the ipod anymore:cool:

Attached Thumbnails

 

Has anybody used this kit? Let me know what you guys think.
Thanks

I bought an ala switch panel for 5 switches for my xp900. I need to find a place to put my 12v outlet. was thinking of drilling the dash and installing it there. has anyone done this? can i see pics of were you put it? ps i dont think i can use the utv inc relocator because i have the ssv underdash subwoofer.

hello lost all my power on my 2013 800 the battery shows 13 volts on the meter but i have no power to the dash or ignition just before this it stalled and the fuel relay was clicking then nothing can anyone help:sad::sad:

hello lost all my power on my 2013 800 the battery shows 13 volts on the meter but i have no power to the dash or ignition just before this it stalled and the fuel relay was clicking then nothing can anyone help:sad::sad: