I don’t think this is pool tubing because not like any I have. This looks like some type of heater hosing. It’s nice because it’s thin. There are a few pieces of it on my 660 and I’d like to get some more. Anyone know what this is?

Attached Thumbnails

 

Hi guys =] I’m looking for snorkel and radiator re-locator kits for my bike. What I’ve turned up is that the 2014 model changed up the racks and other small changes so the old style kits don’t fit.

Triangle ATV Snorkel

I found this one, but it doesn’t fit the 2014. I also want to do the wild boar radiator re-locator…mostly b/c of the sweet grizzly emblem on it.

Thanks in advance! 😀

So after testing my snorkel on a kodiak 450 something strange has happened. Snorkel test went good. Pulled her out of the water and cut it off to let it cool down. Went to restart and wouldnt start. Evrything seemed energized but no power to the starter. So I did the next logical thing, tried the pull start. Fired right up. I let it run for a few minutes and cut it off again . Push button start now working. WTH, wrecking my brain on that one. Does anybody know what could be causing this to happen ?? Also, muddy water was coming out the pull start, does it have a drain plug ? Is there anything I can do to water proof the pull start or make it drain next time I get in deep water ?

So after testing my snorkel on a kodiak 450 something strange has happened. Snorkel test went good. Pulled her out of the water and cut it off to let it cool down. Went to restart and wouldnt start. Evrything seemed energized but no power to the starter. So I did the next logical thing, tried the pull start. Fired right up. I let it run for a few minutes and cut it off again . Push button start now working. WTH, wrecking my brain on that one. Does anybody know what could be causing this to happen ?? Also, muddy water was coming out the pull start, does it have a drain plug ? Is there anything I can do to water proof the pull start or make it drain next time I get in deep water ?

Can anybody that has this kit or made their own like it post pictures of where the 2 lines off the airbox are run and how you snake them to the other fender. I can’t seem to find enough room to do it. Any help is appreciated!!!

:yrules:

Attached Thumbnails

 

 

 

Hi every one. This is my snorkel and reloc. It works well !

Attached Thumbnails

 

I’ve moved them a little but this is about where I’ll have them set up. This is the best way I could figure out to have them out of the way but if you have ideas let me know.
I’ll also be making a stubby set that will be on 99% of the time.
It gets a lot of air with the two 2" being almost a direct shot to the airbox. I wanted as much airflow as I could get because eventually it will at least have a 700 top end.
I can get more pictures of the airbox lid Later if anyone wants to see them.

I finished snorkeling my grizzly thanks to this great forum, so I figure I would post a pic.:gcrules:

Attached Thumbnails

 

I’ve got my front plate made and all my brackets but i am almost to the point of having to buy a kit just to get the hoses and fittings can anyone point me in the right direction the hose 22mm or 7/8" and i cant find hose or barbed fittings anywhere to extend them up over my rack