Is there any difference between the 15 and the 16 base model suspension? Trying to get a lift kit for my 16 but everyone tells me they only have it for the 15 models….anything different between them?
All posts by dstech
Handlebar Lights
Has anyone installed the handlebar lights:
Handlebar Headlight Item #2879245
on their Scrambler? Anyone have the instruction sheet? I would like to see what is involved before I purchase. My dealer knows nothing!
Handlebar Headlight Item #2879245
on their Scrambler? Anyone have the instruction sheet? I would like to see what is involved before I purchase. My dealer knows nothing!
Handlebar Lights
Has anyone installed the handlebar lights:
Handlebar Headlight Item #2879245
on their Scrambler? Anyone have the instruction sheet? I would like to see what is involved before I purchase. My dealer knows nothing!
Handlebar Headlight Item #2879245
on their Scrambler? Anyone have the instruction sheet? I would like to see what is involved before I purchase. My dealer knows nothing!
Crank seal
Just wondering the dealer tells me you have to take the engine apart to change the crank seal. Is this 100% true or are they just trying to scare me into taking it to them to do it? It seems like a lot of work to change a seal. It’s an 08 sportsman 800
Installed all 4 same size tires on stock rims, problem?
Ok so i liked what Dag did with his 4 matching pitbull growler 2.5 27" so i went ahead and bought 4 of the same tires in 26"x9x12. Took my stock wheels in to a tire shop and left them there. Show up 2.5 hours later and they tell me they can’t get the bead to seat on the rear 7" wheels. I didn’t do my research and thought all the rims were the same width. The rears are 7" and fronts are 6". They got the fronts on, but not the rears. They told me i’d need to buy bigger rear tires or get new wheels. I was pretty stressed because i’m heading hunting in a few weeks. So i look on pitbull’s site and it says to use a 7" rim for the 9" wide tires. I talk to them on the phone and they say try another tire shop. I go to another tire shop this morning and they have a hard time as well, but they get them on. So i’ve got 4 26x9x12 pitbull growler, however they look slightly different due to the 1" wider rims compared to the front. It shouldn’t affect the overall diameter that much i’m thinking. It looks ok. I’m going for a test ride to test the tires and my shim and purple spring right now. I didn’t anticipate buying new wheels, so i’m hoping everything will be ok. What do you guys think ?
Display
I have a 09 700 non eps and my display is just flashing E. Starts and runs fine just no display. I did a search and couldn’t find anything. Never had an issue with it before. Any help is appreciated.
WKP Polaris 900 / 1000 Crank Seal Upgrade Kit (WKP-CSK)

WKP Polaris 900 / 1000 Crank Seal Upgrade Kit (WKP-CSK
Required Per Assembly: 1 Kit Per Engine
Application: Polaris RZR & Ranger 900 / 1000 Engine
REPLACES OEM PART # 3610176 (SEAL-FLANGE,LUBE VITON)
THIS KIT UPGRADES FROM THE FACTORY SEAL AND ALLOWS FOR INSTALLATION WITHOUT SPLITTING THE FACTORY CASES
Prone to failure from silicone during sealing the belt box from snorkels
Larger surface area for siliconing belt box for snorkels
Protects seal from dirt, dust and debris from belt failure
Can save you costly repairs
You can purchase online at https://www.warrantykillerperformanc…de-kit-wkp-csk, reply here or PM me.
All Polaris ATV Forums members get $15.00 OFF by saying or using code "PATVF" during discussion or checkout.
If I can help you guys out at all just let me know. 🙂
No power
I have a 2012 sportsman 550 efi w/ power steering .my atv sat for a month I
started it up it ran good so I back it out of the shed left it idling while I closed the doors and it stalled out . I went to start it up again when I turned the key I
had nothing no power, no instrument panel, no lights nothing . so I checked the fuzes they were ok then after 5 to 10 mins. everything came back on I started it and it ran fine. it happened again about a week later. if you have any ideas please let me know because I don’t have an idea. thank you
started it up it ran good so I back it out of the shed left it idling while I closed the doors and it stalled out . I went to start it up again when I turned the key I
had nothing no power, no instrument panel, no lights nothing . so I checked the fuzes they were ok then after 5 to 10 mins. everything came back on I started it and it ran fine. it happened again about a week later. if you have any ideas please let me know because I don’t have an idea. thank you
where can i buy parts
where can i buy a stator at
An BC interior riders on here?
I got a wild hair last week and decided a solo trip to Banff was needed over the long weekend. While on my way I saw a lot of rigs heading toward the BC Rockies loaded up with ATV’s and SxS’s. Probably 20+ rigs. After driving through I now want to spend some time up there off road. So I’m looking for places to ride, and recommendations on where to stay, etc. Once I’m at a point where this trip comes to fruition. I’ll make sure to post about it and of course, the more the merrier.